Critical Conduction Mode Pfc Controller

  The FAN7529 is an active power factor correction (PFC) controller for boost PFC applications that operates in critical conduction mode (CRM). It uses the voltage mode PWM that compares an internal ramp signal with the error amplifier output to generate MOSFET turn-off signal. Because the voltage-mode CRM PFC controller does not need rectified AC line voltage information, it saves the power loss of the input voltage sensing network necessary for the current-mode CRM PFC controller. FAN7529 provides many protection functions, such as over-voltage protection, open-feedback protection, over-current protection, and under-voltage lockout protection. The FAN7529 can be disabled if the INV pin voltage is lower than 0.45V and the operating current decreases to 65A. Using a new variable on-time control method, THD is lower than the conventional CRM boost PFC ICs.FAN7529's datasheet is the same as FAN7529
Share this FAN7529 pinout picture with your friends or on forums

FAN7529 pinout from datasheet
Item: FAN7529
File Size : 221 KB
Pages : 20 Pages

Other Part Numbers in this pdf file

FAN7529N   FAN7529MX   FAN7529M  
Fairchild Semiconductor

Download FAN7529 datasheet