Half-bridge Gate Driver Ic

  The IR2114 21141/2214 IR22141 Gate Driver family is suited to drive a single half Bridge in power switching applications. The high Gate driving capability (2A source, 3A sink) and the low quiescent current enable bootstrap supply techniques in medium power systems. These drivers feature full short circuit protection by means of the power Transistor desaturation detection and manages all the half-bridge faults by turning off smoothly the desaturated Transistor through the dedicated soft shut down pin, therefore preventing over-voltages and reducing EM emissions. In multi-phase system IR2114 21141/2214 IR22141 drivers communicate using a dedicated local network (SY_FLT and FAULT/SD signals) to properly manage phase-to-phase short Circuits The system controller may force shutdown or read device fault state through the 3.3 V compatible CMOS I/O pin (FAULT/SD). To improve the signal immunity from DC-bus noise, the control and power ground use dedicated pins enabling low-side emitter current sensing as well. Undervoltage conditions in floating and low voltage Circuits are managed independently.IR2214's datasheet is the same as IR2114
Share this IR2114 pinout picture with your friends or on forums

IR2114 pinout from datasheet
Item: IR2214
File Size : 65 KB
Pages : 21 Pages

Other Part Numbers in this pdf file

IR2214   IR2114SS  
International Rectifier Corp.

Download IR2214 datasheet