Monolithic Linear IC
designed for low supply voltage-use appliance such as por-
table radio or car stereo.
• Wide supply voltage range down to low supply voltage :
• Operation of forced monaural (IF muting) or VCO stop-
ping by only one pin.
Depending on supply voltage :
0.7V<V9< 2.1V : forced monaural (IF muting)
• Good ripple rejection.
• High level of lamp turning-on sensitivity : 7mV.
• With separation control pin.
• High gain.
• Less current consumption : 8.5mA typical.
SANYO : DIP16
Absolute Maximum Ratings
at Ta = 25˚C
Maximum Supply Voltage
Lamp Driving Current
Allowable Power Dissipation
–20 to +70
–40 to +125
Recommended Operating Conditions
at Ta = 25˚C
Recommended Supply Voltage
Input Signal Voltage
100 to 200
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
12800TH (KT)/33194HO/O077KI/8225MW/8044KI/8260KI, TS No.505–1/8